Film-type patterned retarder

FPR (Film-type Patterned Retarder) is a technology promoted by LG that is employed in its line of 3D televisions based on circular polarization. It shows left and right images through different patterns in a circular polarizer.^[1] Left/right polarized glasses allow the left and right images to then be seen by the left and right eyes separately. Both images are combined in the brain and generate the 3D effect. The FPR technology uses the precise film which can distinguish the left and right images to show a different image for each eye. FPR 3D tech is able to deliver a brighter screen with less cross talk, less ghosting, and no flickering.

History

SG (Shutter Glasses) 3D shows each left and right image alternately. When TV displays left eye image, the glasses block the signal of right eye image by closing the shutter of right glass lens. By contrast, FPR 3D shows the both images of left-eye and right-eye simultaneously, dividing the images into right-eye and left-eye by the correlation between FPR film on panel surface and polarizing glasses.

Shutter glasses mostly eliminate "ghosting" which is a problem with other 3D display technologies such as RealD 3D, or Dual projector setups. Moreover, unlike red/cyan colour filter 3D glasses, LC shutter glasses are colour neutral, enabling 3D viewing in the full colour spectrum, but the technology has problems such as twinkle, vertigo, and uncomfortable glass Liquid crystal shutter glasses.

FPR 3D has been contrived to offer all solutions for the restraints that SG (Shutter Glasses) 3D has held back in 3D TV boom-up. Some obstacles such as eye-health-concern caused by flicker & cross-talk, and heavy and inconvenient 3D glasses run by rechargeable battery are there in 3D TV industry.

An early implementation of the technology was by Zalman, in their 'Trimon' computer monitors rather than TV, available around the end of 2007.

Overview

FPR (Film-type Patterned Retarder) improves on the cost of Patterned Retarder (PR) technology that needed to add an extra polarizing glasses substrate to the LCD TV panel. FPR has reached the point where it can use film instead of glass, reducing the extra cost to 25% of what it used to be, while the polarized glasses are 80% cheaper than shutter glasses.[1]

Advantages

• Flicker can be easily seen at SG due to the glasses’ on/off action & interference with other light sources. FPR does not suffer from increased flickering. Excessive flicker has been the source of complaints over eye fatigue and poor picture quality, as well as serious health concerns like photosensitive epilepsy. The FPR Technology received a "Flicker Free" certification from Intertek and TUV, two of the most respected inspection and certification bodies in the world. [2]
• FPR panels provide brighter 3D images. Nearly two times brighter than conventional 3D TVs, the FPR 3D TV produces brighter and clearer pictures with 3D Light Boost, a thin film covering the screen that enhances brightness in 3D.
• FPR glasses are "passive" and do not use electricity. This means that there is no battery to charge or replace, unlike SG technology. The SG technology can only use glasses which are connected with TV in sync so there are few glasses that viewers can use. In contrast, the FPR technology does not need this process so there is no limit to the amount of people who can watch the 3D TV at the same time. In addition, glasses can be shared between different 3D sources, including monitors and laptops.
• FPR replaces glass with film, which costs only 1/4 as much.[3] And the glasses are lighter.
• The glasses used with FPR are much cheaper than the equivalent SG glasses.

Disadvantages

• Since each eye will only see one of two circularly polarized images and the polarizing filters are static, two unique images must be displayed simultaneously. This means that twice the number of pixels (interleaved with the "regular" pixels in rows or columns) are required to maintain the same effective resolution as a 2D image. Without these extra pixels the resolution would be halved (for each eye) on the horizontal or vertical axis.

References